2008 Chrysler Pacifica Key Fob Battery Replacement Instructions
Key fob allow easy access to your Chrysler. Once the key fob battery is weak you’ll lose your fob’s ability to control remote functions. In this article, you will benefit from knowing how to disassembly your remote key fob and replace a dead or weak battery DIY. If you gonna solve to do it at home near Pacifica, follow our instruction, but don't forget to check all you need before you start.
What size battery does 2008 Chrysler Pacifica remote key fob take
Prior to open remote key fob make sure that you have all recommended tools and materials: 1xCR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Step by step guide
A small button battery installed inside the your keyless entry remote. Gently try to open your key fob with hands or flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Be sure to connect the battery the right way around in a circuit. Your key will not work if you put battery wrong way.
Before assembling fob’s case, check that all functions works by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Carefully try to assemble the two halves in place by hands from top to bottom. If your fob case firmly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
How To Replace A 2004 - 2008 Chrysler Pacifica Key Fob Remote Battery
Still not working? Buy new one