How to Open Your 2008 Chrysler Town & Country Key Fob & Change Battery

How to Open Your 2008 Chrysler Town & Country Key Fob & Change Battery

If your auto key fob is no longer working properly, the cell battery more likely needs to be changed. It's not complicated to change the battery in your keyless entry remote with our ultimate guide. All you need is explained in this post.

What kind of battery key fob require

Prior to open key fob check all that you need: flat head screwdriver and 1xCR2032 battery.
  • 1xCR2032 battery
  • flat head screwdriver

Simple steps to change the battery in your car's remote key fob

Inside of your keyless entry remote installed small button battery. Delicately try to disassemble your keyless entry remote with hands or flat head screwdriver. Remove CR2032 battery with flat head screwdriver.

Change old battery with new one CR2032. Be sure to connect the battery the right way around in a circuit. Your key will not work if you connect battery wrong way.

Before assembling keyless entry fob's case, make sure that all is functioning by pressing buttons on circuit board.

At this point squeeze fob’s back cover together. Line your body pieces together and put it together by hands from top to bottom. If your key fob case tightly closed, we done. If not, repeat the last step.

How to change the battery video guide

How To Replace Chrysler Town & Country Key Fob Battery DIY 2008 2009 2010 2011 2012 2013 2014 2015

Still not working? Buy new one

FAQ

Key fob of Chrysler Town & Country require 1xCR2032 batteries. Most CR2032 batteries are under $6 depending on the size packaging, type and brand you buy. Take your old battery to the store, to be sure.

Usually, after remote key fob battery change, reprogramming not required. Keyless entry remote reprogramming procedure often described in user's manual of your vehicle.

Yes, you can change battery in your 2008 Chrysler Town & Country key yourself. Most hard part is to open keyless entry fob's case. It's pretty easy with our instruction.

The cost to change the battery in key can run anywhere $50-600 depending on the brand and the service pricing.

You should change batteries inside remote key fob of Chrysler Town & Country at least once in 4 years. The term of battery vary on their amount of use, quality and operating conditions.

If your auto fob's battery more than 4 years old, signal strength reduced, has low key battery indicator on dashboard or need multiple clicks to unlock or lock doors, in most cases battery replace in remote key fob required. Installed battery is weak or dead with a high probability, but if it's not help to fix issues, keyless entry remote change or repair needed.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: IYZ-C01C
  2. Models: 2001-2016 Chrysler Town & Country