How to Open Your 2008 Ford F-350 Key Fob and Change Battery
If your auto keyless entry remote is not unlock doors correct, the cell battery most likely must to be changed. It's not complicated to replace the battery in your key fob, and it’s easier than you think. All you need is explained in this article.
What type battery keyless entry remote use
Replacing battery in key fob require flat head screwdriver and 1 CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your car's key fob
A small button cell battery installed in the your remote key fob. Gently try to disassemble your fob with flat head screwdriver. Change one CR2032 battery with flat head screwdriver.
Get new battery and install it inside fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, check that all is functioning by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and assemble it together by hands from top to bottom. Inspect your key fob case for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2008 Ford F-350 Video
DIY: Ford Keyless Remote Battery Replacement & Disassembly
Still not working? Buy new one