How to Replace the Battery in a 2008 Honda CR-V Key Fob
If your car remote key fob is no longer open doors correct, the battery surely needs to be changed. In this article, we are going to tell you how to disassembly your car remote key fob and replace a discharged battery DIY. If you choose to do it at home near CR-V, follow our guide, but don't forget to check all you need.
What kind of battery remote key fob requirePrior to disassembly keyless entry remote be sure that you have all required tools and materials: phillips head screwdriver, flat head screwdriver and 2xCR2032 batteries.
- phillips head screwdriver
- flat head screwdriver
- 2xCR2032 batteries
Simple steps to replace the battery in your CR-V's key fob
A tiny coin cell battery installed in the your keyless entry remote. Remove fasteners on the back of the key fob. Flip the keyless entry remote over and find for at least one fastener holding in the plastic.
Delicately try to pry apart your keyless entry remote with flat head screwdriver. Change 2 CR2032 batteries with flat head screwdriver.
Get new batteries and install it in fob’s case. Battery must be placed with the same polarity as was a previous. Your keyless entry remote will not work if you mistakenly put battery wrong way.
After the new batteries installed, check keyless entry remote functionality by pressing buttons. If all functions works, assemble your fob’s body in reverse order.
The last thing to do is put your cover back on fob. Delicately try to assemble the pieces together by hands from top to bottom. If your fob case tightly closed, we done. If not, repeat the last step. Screw the back of the keyless entry remote.
How to change the battery video instruction
How To Change A Honda CR-V Key Fob Battery (2005- 2013)