2008 Jaguar XJ8 Key Fob Battery Replacement Guide
If your auto key is no longer open doors correct, the battery probably must to be replaced. It's not difficult to replace the battery in your key fob with our guide. All you need is described in this article.
What size battery does 2008 Jaguar XJ8 remote key fob take
Before starting disassembly keyless entry remote check all that you need: 1xCR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Simple steps to change the battery in your XJ8's keyless entry remote
Inside of your remote key fob installed small button cell battery. Open the key if it is in the keyless entry remote.
Accurately try to disassemble your key with pry tools. Change one CR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Battery must be installed with the same polarity as was an old. Your keyless entry remote will not work if you by mistake place battery wrong way.
After the new battery installed, verify keyless entry remote by pressing buttons. If everything working good, assemble your fob’s shell in reverse order.
At this point squeeze fob’s back cover together. Line your case pieces together and assemble it together by hands from top to bottom. Inspect your key body for gaps. If it is not firmly closed try to repeat last step.
How to change the battery video instruction
DIY: Jaguar Key Fob Battery Replacement
Still not working? Buy new one