2008 Lexus GS 350 Key Fob Battery Replacement Guide

Remote key fob allow access to your car. When the keyless entry remote battery is dead you not to be able close trunk or doors remotely. In this post, we explained how to disassembly your car keyless entry remote and replace a dead or weak battery yourself. If you decide to do it at home near GS 350, follow our instruction, but first make sure you have everything you need.
What type battery key fob require
Before starting open remote key fob check all that you need: 1 CR1632 battery and flat head screwdriver.- 1xCR1632 battery
- flat head screwdriver
Step by step guide
Inside of your remote key fob installed small coin battery. Remove any internal key first, and then try to pry apart the key fob.
Gently try to open your keyless entry remote with pry tools. Replace one CR1632 battery with flat head screwdriver.
Change old battery with new one CR1632. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that all is functioning by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and assemble it together by hands from top to bottom. Check your keyless entry remote shell for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2008 Lexus GS 350 Video
How to ● Lexus Key Fob Remote Keyless Battery Replace HS, ES, GS, LS, IS, GX, CT
Still not working? Buy new one