How to Replace the Battery in a 2008 Saturn Outlook Key Fob
If your Outlook remote key fob is not unlock doors properly, the cell battery more likely must to be replaced. Below, you’ll benefit from knowing how to disassembly Saturn key fob and replace a weak or dead battery DIY. If you choose to do it at home near Outlook, follow our guide, but don't forget to check tools and materials required before you start.
What size battery does 2008 Saturn Outlook keyless entry remote requiredReplacing battery in keyless entry remote require flat head screwdriver and one CR2032 battery. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to replace the battery in your car's keyless entry remote
A coin battery installed inside the your keyless entry remote. Accurately try to disassemble your remote key fob with flat head screwdriver. Remove 1xCR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that all functions works by pressing buttons on remote key fob.
The last thing to do is put your cover back on fob. Gently try to put the pieces together by hands from top to bottom. If your key shell tightly closed, we done. If not, repeat the last step.
How to change the battery video instruction
How To Replace A 2007 - 2010 Saturn Outlook Key Fob Battery
Still not working? Buy new one