How to Replace the Battery in a 2008 Scion xB Key Fob
If your Scion keyless entry remote is not unlock doors perfectly, the cell battery surely must to be replaced. Below, we are going to tell you how to open Scion key fob and replace a dead or weak battery yourself. If you choose to do it at home near xB, use this guide, but first make sure you have everything you need.
What type battery does 2008 Scion xB remote key fob takeReplacing battery in keyless entry remote require CR2016 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.
- flat head screwdriver
- 1xCR2016 battery
Simple steps to replace the battery in your car's key fob
A coin cell battery installed inside the your keyless entry remote. Delicately try to pry apart your fob with flat head screwdriver. Remove 1 CR2016 battery with flat head screwdriver.
Now it's time to install new battery inside keyless entry fob's shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, check that all working fine by pressing buttons on key fob.
The last thing to do is put your cover back on fob. Gently try to put the pieces together by hands from top to bottom. If your fob shell firmly closed, we done. If not, repeat the last step.
Video of remote key fob opening
How to Replace TOYOTA / SCION Key Fob Battery | EASY!