How to Replace the Battery in a 2008 Subaru Legacy Key Fob
If your auto key fob is no longer unlock doors well, the battery probably must to be replaced. It's not difficult to replace the battery in your key fob DIY. All you need is described below.
What type battery does 2008 Subaru Legacy remote key fob takeDon't forget before disassembly remote key fob check all that you need: 1 CR2025 battery and flat head screwdriver.
- flat head screwdriver
- 1xCR2025 battery
Step by step guide
A small coin battery installed in the your keyless entry remote. Delicately try to open your keyless entry remote with hands or flat head screwdriver. Change CR2025 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's case. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you connect battery wrong way.
Before assembling fob’s case, verify that everything working fine by pressing buttons on key fob.
At this point squeeze fob’s back cover together. Line your shell two halves together and put it together by hands from top to bottom. Check your fob case for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2008 Subaru Legacy Video
DIY - Subaru Legacy Outback Key Fob Battery Replacement EASY
Still not working? Buy new one