2009 Buick Enclave Key Fob Battery Replacement Guide
Keyless entry remote grant access to your auto. When the keyless entry remote battery is weak or dead you’ll lose your fob’s ability to control distance functions. In this case, you will benefit from knowing how to disassembly Buick remote key fob and replace a weak battery DIY. If you choose to do it at home near Enclave, use this guide, but don't forget to check all you need.
What type battery remote key fob requireBefore you start to disassembly key fob check all that you need: one CR2032 battery and flat head screwdriver.
- flat head screwdriver
- 1xCR2032 battery
Step by step guide
A button battery installed in the your keyless entry remote. Gently try to pry apart your keyless entry remote with flat head screwdriver. Remove one CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, make sure that all working good by pressing buttons on key fob.
The last thing to do is put your cover back on fob. Gently try to put the two halves together by hands from top to bottom. If your key fob case firmly closed, we done. If not, repeat the last step.
How to change the battery video instruction
How To Replace A #Buick Enclave Key Fob Battery 2008-2017 FCC ID OUC60270
Still not working? Buy new one