Replace Key Fob Batteries

2009 Chrysler Aspen Key Fob Battery Replacement Guide

2009 Chrysler Aspen Key Fob Battery Replacement Guide

Key fob grant easy access to your Chrysler. If the remote key fob battery is dead or weak you not to be able lock trunk or doors from distance. It's not difficult to change the battery in your key fob with our instruction. All you need is outlined below.

What type battery remote key fob require

Replacing battery in keyless entry remote require flat head screwdriver and one CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
  • 1xCR2032 battery
  • flat head screwdriver

Simple steps to change the battery in your car's key fob

Inside of your remote key fob installed coin cell battery. Carefully try to disassemble your remote key fob with flat head screwdriver. Replace 1xCR2032 battery with flat head screwdriver.

Get new battery and install it inside fob’s shell. Be sure to connect the battery the right way around in a circuit. Your key will not work if you connect battery wrong way.

Before assembling fob’s case, check that all working properly by testing buttons on remote key fob.

At this point squeeze keyless entry fob's back cover together. Line your shell two halves together and put it together by hands from top to bottom. Check your key body for gaps. If it is not firmly closed try to repeat last step.

Video of keyless entry remote opening

How To Replace Chrysler Aspen Key Fob Battery 2007 2008 2009

Still not working? Buy new one

FAQ

Remote key fob of Chrysler Aspen use 1xCR2032 batteries. Price for CR2032 batteries are under $4 depending on the brand, size packaging and type you buy. You can take old battery to the store, with you to find a proper replacement.

Remote key fob in most of cases do not require to be reprogrammed after battery replace. If your key not working, recheck new battery voltage. Otherwise, read user's manual or contact local dealer.

Replacing your keyless entry remote battery is simple to do in 2009 Chrysler Aspen. Most of car manufacturers think about clients and make a special hole for key fob open.

Dealer service price for change the battery in key is $50-600 depending on the car.

Remote key fob batteries in Chrysler Aspen should be replaced every three years, although this will differ based on their amount of use and build quality. If your remote key fob shortened signal strength, you should replace batteries before it stop open doors and make trouble for you.

If your car has low key battery indicator on dashboard, need multiple clicks to unlock or lock doors, fob's battery more than 4 years old or key fob buttons not working, in most cases battery replace inside remote key fob needed. Installed battery is discharged with a high probability, but if it's not help, key change or repair required.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Chrysler Models:

Fob Compatibility:

  1. FCC ID: OHT692427AA
  2. Models: 2007-2009 Chrysler Aspen