How to Open Your 2009 Chrysler PT Cruiser Key Fob & Change Battery
Remote key fob allow easy access to your car. When the key fob battery is dead you’ll not to be able close doors from distance. In this article, you’ll benefit from knowing how to disassembly your car key fob and change a discharged battery yourself. If you choose to do it at home near PT Cruiser, follow our instruction, but don't forget to check tools and materials required.
What type battery does 2009 Chrysler PT Cruiser keyless entry remote take
Before going to disassembly keyless entry remote make sure that you have all recommended tools and materials: flat head screwdriver and 1 CR2032 battery.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
A coin cell battery installed in the your key fob. Gently try to disassemble your remote key fob with pry tools. Remove 1 CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, check that all functions works by testing buttons on key fob.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and put it in place by hands from top to bottom. If your keyless entry remote case firmly closed, we done. If not, repeat the last step.
How to change the battery video instruction
Chrysler PT Cruiser Key Fob Battery Replacement (2006 - 2010)
Still not working? Buy new one