How to Open Your 2009 Dodge Durango Key Fob and Change Battery
Remote key fob allow access to your auto. If the keyless entry remote battery is weak or dead you’ll not to be able open trunk or doors from distance. It's not difficult to change the battery in your remote key fob with our ultimate guide. All tools, that you need is explained below.
What is the battery keyless entry remote require
Prior to disassembly key fob be sure that you have all required tools and materials: phillips head screwdriver, 1 CR2032 battery and flat head screwdriver.- flat head screwdriver
- phillips head screwdriver
- 1xCR2032 battery
Step by step instruction
A small button battery installed inside the your remote key fob. Move the key out of the way if it is in the key fob. Remove screw on the back of the remote key fob. Flip the key fob over and look for at least 1 fastener holding in the plastic.
Gently try to pry apart your keyless entry remote with hands or flat head screwdriver. Replace 1 CR2032 battery with flat head screwdriver.
Now it's time to install new battery in keyless entry fob's case. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, check that all functions works by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your body pieces together and put it in place by hands from top to bottom. Inspect your fob shell for gaps. If it is not tightly closed try to repeat last step. Screw the back of the keyless entry remote.
Video of key fob opening
How To Replace A 2006 - 2009 Dodge Durango Key Fob Battery FCC ID OHT692714AA
Still not working? Buy new one