Replace Key Fob Batteries

How to Replace the Battery in a 2009 Jeep Commander Key Fob

How to Replace the Battery in a 2009 Jeep Commander Key Fob

If your Jeep key is not working properly, the cell battery more likely must to be changed. In this article, we explained how to disassembly your car key fob and replace your Jeep key battery.

What type battery remote key fob require

Don't forget before disassembly keyless entry remote make sure that you have all recommended tools and materials: flat head screwdriver and 1xCR2032 battery.
  • 1xCR2032 battery
  • flat head screwdriver

Step by step guide

Inside of your key fob installed coin battery. Move the key out of the way if it is in the key fob.

Delicately try to disassemble your remote key fob with hands or flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.

Change old battery with new one CR2032. Battery must be placed with the same position as was a previous. Your key will not work if you by mistake place battery wrong way.

After the new battery installed, verify keyless entry remote functionality by pressing buttons. If everything is functioning, assemble your fob’s case in reverse order.

The last thing to do is put your cover back on fob. Carefully try to assemble the two halves together by hands from top to bottom. If your remote key fob case tightly closed, we done. If not, repeat the last step.

Video of key opening

How To Replace Jeep Commander Key Fob Battery 2008 2009 2010 2011

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Jeep Commander use 1xCR2032 batteries. Most CR2032 batteries are under $4-6 build upon the type, size packaging and brand you buy. You can take old battery to the store, with you to find a proper replacement.

Keyless entry remote in most of cases reprogramming not required after battery change. If your keyless entry remote not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Changing your key fob battery is easy to do in 2009 Jeep Commander. Most of car manufacturers think about customers and make a special hole for key fob open.

Dealer service cost for change the battery in remote key fob is $50-600 depending on the brand.

Key fob batteries in Jeep Commander should be changed every 3-4 years, also this will vary based on frequency of use and quality. If your remote key fob reduced signal strength, you should replace batteries before it stop open doors and make trouble for you.

These symptoms will warning you that it's perhaps time to replace battery in your Jeep Commander: multiple clicks to unlock or lock doors required, signal strength reduced, low key battery indicator on dashboard and key fob buttons not working.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Jeep Models:

Fob Compatibility:

  1. FCC ID: OHT692427AA
  2. Models: 2007-2010 Jeep Commander Limited