How to Replace the Battery in a 2009 Jeep Liberty Key Fob

How to Replace the Battery in a 2009 Jeep Liberty Key Fob

Key fob grant access to your auto. When the key battery is dead or weak you’ll lose your keyless entry fob's ability to control distance opportunities. In this post, we described how to open your car key fob and replace your Jeep key battery.

What kind of battery remote key fob require

Before beginning open key fob check all that you need: 1 CR2032 battery and flat head screwdriver.
  • flat head screwdriver
  • 1xCR2032 battery

Step by step guide

A coin cell battery installed in the your key fob. Move the key out of the way if it is in the remote key fob.

Carefully try to open your remote key fob with hands or flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.

Change old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.

After the new battery installed, verify remote key fob functionality by pressing buttons. If all functions works, assemble your fob’s case in reverse order.

The last thing to do is put your cover back on fob. Gently try to put the two halves together by hands from top to bottom. If your key fob body firmly closed, we done. If not, repeat the last step.

How to replace the battery video guide

Jeep Liberty Key Fob Battery Replacement (2005 - 2012)

Still not working? Buy new one

Frequently Asked Questions

Key fob of Jeep Liberty use 1xCR2032 batteries. Most CR2032 batteries are under $4-6 build upon the type, size packaging and brand you buy. You can take old battery to the store, to find a proper replacement.

Remote key fob in most of cases do not need to be reprogrammed after battery change. If your key not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Changing your remote key fob battery is easy to do in 2009 Jeep Liberty. Most of car manufacturers think about clients and make a special hole for key fob disassembly.

Dealer service price for replace the battery in fob is from 50 to 600 dollars depending on the brand.

Keyless entry remote batteries in Jeep Liberty should be replaced once in 4 years, also this will differ based on usage and battery quality. If your remote key fob reduced signal strength, you should change batteries before it stop working and make problems for you.

If your auto key fob buttons not working, signal strength reduced, fob's battery more than 4 years old or has low key battery indicator on dashboard, it's probably battery change inside remote key fob required. Currently installed battery is weak with a high probability, but if it's not fix, key fob replace or repair needed.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: OHT692427AA
  2. Models: 2008-2010 Jeep Liberty