How to Open Your 2009 Nissan Cube Key Fob and Change Battery
If your Cube remote key fob is no longer working well, the battery likely must to be changed. In this case, you’ll benefit from knowing how to disassembly your car remote key fob and change a dead battery yourself. If you decide to do it at home near Cube, follow our guide, but don't forget to check everything you need before you start.
What type battery does 2009 Nissan Cube remote key fob required
Before you start to disassembly remote key fob be sure that you have all required tools and materials: flat head screwdriver and 1xCR1620 battery.- flat head screwdriver
- 1xCR1620 battery
Step by step guide
A small coin battery installed inside the your remote key fob. Move the key out of the way if it is in the keyless entry remote.
Carefully try to disassemble your key fob with hands or flat head screwdriver. Remove 1 CR1620 battery with flat head screwdriver.
Change old battery with new one CR1620. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you connect battery wrong way.
After the new battery installed, verify remote key fob functionality by pressing buttons. If all functions works, assemble your keyless entry fob's body in reverse order.
At this point squeeze fob’s back cover together. Line your body two halves together and assemble it in place by hands from top to bottom. If your key fob shell firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2009 Nissan Cube Video
How To Replace A 2009 - 2014 Nissan Cube Key Fob Battery FCC ID CWTWB1U751
Still not working? Buy new one