2009 Nissan Quest Key Fob Battery Replacement Instructions
If your car remote key fob is not unlock doors perfectly, the battery likely needs to be replaced. In this case, we are going to tell you how to open Nissan key fob and change a discharged battery yourself. If you gonna solve to do it at home near Quest, use this instruction, but first make sure you have tools and materials required.
What type battery does 2009 Nissan Quest remote key fob requiredChanging battery in key fob require flat head screwdriver and one CR2025 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
- flat head screwdriver
- 1xCR2025 battery
Simple steps to replace the battery in your car's remote key fob
Inside of your keyless entry remote installed coin battery. Remove any internal key before you try to pry apart the remote key fob.
Accurately try to disassemble your key with pry tools. Change 1xCR2025 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's body. Be sure to connect the battery the right way around in a circuit. Your key fob will not work if you place battery wrong way.
Before assembling keyless entry fob's case, verify that all functions works by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and put it in place by hands from top to bottom. If your key shell tightly closed, we done. If not, repeat the last step.
How to replace the battery video guide
How To Replace Nissan Quest Key Fob Battery 2004 2005 2006 2007 2008 2009 2010