2009 Toyota Matrix Key Fob Battery Replacement Instructions
If your auto remote key fob is not open doors perfectly, the cell battery more likely needs to be replaced. In this article, we are going to tell you how to open your car key fob and change a dead battery yourself. If you gonna solve to do it at home near Matrix, use this guide, but don't forget to check tools and materials required before you start.
What type battery does 2009 Toyota Matrix keyless entry remote takeChanging battery in remote key fob require 1 CR2016 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.
- 1xCR2016 battery
- flat head screwdriver
Step by step instruction
Inside of your remote key fob installed tiny coin battery. Remove any internal key first, and then try to pry apart the key fob.
Delicately try to open your fob with pry tools. Replace 1 CR2016 battery with flat head screwdriver.
Change old battery with fresh one CR2016. Battery must be placed with the same polarity as was a previous. Your keyless entry remote will not work if you mistakenly put battery wrong way.
Before assembling fob’s case, verify that all functions works by testing buttons on keyless entry remote.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it together by hands from top to bottom. If your fob shell tightly closed, we done. If not, repeat the last step.
Video of keyless entry remote opening
How to ● Toyota Key Fob Remote Keyless Battery Change/Replace
Still not working? Buy new one