How to Open Your 2010 Acura MDX Key Fob & Change Battery
Key fob grant easy access to your Acura. If the key battery is weak or dead you will not to be able close car from distance. Yes, it is possible to replace the battery in your keyless entry remote, and it’s easier than you think. All tools, that you need is outlined below.
What type battery remote key fob use
Before beginning disassembly keyless entry remote check all that you need: phillips head screwdriver, flat head screwdriver and 1xCR1616 battery.- phillips head screwdriver
- flat head screwdriver
- 1xCR1616 battery
Simple steps to replace the battery in your MDX's remote key fob
Inside of your remote key fob installed tiny button battery. Unscrew the back of the remote key fob. Flip the remote key fob over and look for at least 1 screw holding in the plastic.
Carefully try to disassemble your keyless entry remote with hands or flat head screwdriver. Remove 1xCR1616 battery with flat head screwdriver.
Replace old battery with new one CR1616. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you put battery wrong way.
Before assembling fob’s case, check that everything working properly by testing buttons on circuit board.
The last thing to do is put your cover back on fob. Carefully try to put the two halves in place by hands from top to bottom. If your key case firmly closed, we done. If not, repeat the last step. Screw fastener in the back of the key fob.
Key Fob Battery Replacement 2010 Acura MDX Video
HOW TO REPLACE YOUR KEYLESS REMOTE BATTERY ON ANY ACURA OR HONDA VEHICLE.
Still not working? Buy new one