How to Replace the Battery in a 2010 Audi A6 Key Fob
Remote key fob allow access to your auto. If the key fob battery is discharged you’ll lose your keyless entry fob's ability to control distance opportunities. It's not difficult to change the battery in your remote key fob DIY. All you need is outlined in this article.
What type battery does 2010 Audi A6 remote key fob takePrior to disassembly key fob make sure that you have all recommended tools and materials: one CR2032 battery and flat head screwdriver.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your car's keyless entry remote
Inside of your keyless entry remote installed tiny button cell battery. Open the key if it is in the remote key fob.
Carefully try to open your key fob with pry tools. Replace one CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Battery must be installed with the same position as was an old. Your remote key fob will not work if you by mistake place battery wrong way.
Before assembling fob’s case, verify that all functions works by testing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it together by hands from top to bottom. Check your fob body for gaps. If it is not firmly closed try to repeat last step.
Video of key fob opening
How to replace the battery in your Audi A6 key fob.
Still not working? Buy new one