2010 Chevrolet Silverado Key Fob Battery Replacement Instructions
If your Chevrolet key isn't open doors correct, the cell battery surely must to be replaced. It's not complicated to replace the battery in your remote key fob with our guide. All you need is outlined in this post.
What type battery key fob requirePrior to open keyless entry remote check all that you need: flat head screwdriver and CR2032 battery.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your car's remote key fob
A small coin battery installed in the your key fob. Delicately try to open your key with hands or flat head screwdriver. Remove CR2032 battery with flat head screwdriver.
Now it's time to install new battery in keyless entry fob's body. Battery must be placed with the same polarity as was a previous. Your key will not work if you mistakenly put battery wrong way.
Before assembling keyless entry fob's case, make sure that everything is functioning by pressing buttons on circuit board.
At this point squeeze keyless entry fob's back cover together. Line your body pieces together and assemble it in place by hands from top to bottom. Check your key fob case for gaps. If it is not firmly closed try to repeat last step.
Key Fob Battery Replacement 2010 Chevrolet Silverado Video
How To Replace A Chevrolet Silverado Key Fob Battery 2007 - 2013 FCCID: OUC60270