2010 Chevrolet Suburban Key Fob Battery Replacement Guide

If your car key isn't open doors perfectly, the battery most likely must to be replaced. In this post, you will benefit from knowing how to disassembly Chevrolet remote key fob and replace a weak battery DIY. If you decide to do it at home near Suburban, use this instruction, but don't forget to check all you need.
What size battery does 2010 Chevrolet Suburban keyless entry remote take
Changing battery in key fob require 1 CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.- flat head screwdriver
- 1xCR2032 battery
Step by step guide
A tiny button cell battery installed in the your remote key fob. Delicately try to open your remote key fob with hands or flat head screwdriver. Change one CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Battery must be installed with the same position as was a previous. Your key will not work if you mistakenly put battery wrong way.
When the new battery installed, check key fob by pressing buttons. If everything working good, assemble your keyless entry fob's body in reverse order.
The last thing to do is put your cover back on fob. Gently try to put the two halves in place by hands from top to bottom. Check your fob body for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2010 Chevrolet Suburban Video
Tahoe / Suburban Key Fob Battery Replacement - DIY