How to Replace the Battery in a 2010 Dodge Challenger Key Fob
If your auto key is not working perfectly, the cell battery more likely needs to be replaced. In this post, you will benefit from knowing how to disassembly Dodge remote key fob and replace a weak battery DIY. If you gonna solve to do it at home near Challenger, use this instruction, but don't forget to check everything you need before you start.
What type battery does 2010 Dodge Challenger keyless entry remote takeBefore starting open key fob make sure that you have all required tools and materials: flat head screwdriver, phillips head screwdriver and CR2032 battery.
- 1xCR2032 battery
- phillips head screwdriver
- flat head screwdriver
Step by step instruction
A tiny coin cell battery installed in the your key fob. Move the key out of the way if it is in the remote key fob. Remove screw on the back of the key fob. Flip the keyless entry remote over and find for at least 1 fastener holding in the plastic.
Delicately try to disassemble your keyless entry remote with flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Be sure to connect the battery the right way around in a circuit. Your key will not work if you connect battery wrong way.
Before assembling fob’s case, make sure that everything working good by pressing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your body pieces together and put it in place by hands from top to bottom. If your fob case tightly closed, we done. If not, repeat the last step. Screw the back of the key fob.
How to replace the battery video instruction
Dodge Key Fob Battery replacement This Easy?