How to Replace the Battery in a 2010 Dodge Charger Key Fob

How to Replace the Battery in a 2010 Dodge Charger Key Fob

Keyless entry remote allow easy access to your Dodge. When the key battery is weak you’ll not to be able lock car from distance. In this post, you’ll benefit from knowing how to disassembly Dodge key fob and replace a dead battery yourself. If you choose to do it at home near Charger, use this instruction, but don't forget to check everything you need.

What type battery keyless entry remote require

Replacing battery in remote key fob require 1xCR2032 battery, phillips head screwdriver and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
  • phillips head screwdriver
  • flat head screwdriver
  • 1xCR2032 battery

Step by step instruction

A small button cell battery installed in the your keyless entry remote. Remove any internal key before you try to pry apart the keyless entry remote. Unscrew the back of the keyless entry remote. Flip the keyless entry remote over and look for at least one fastener holding in the plastic.

Accurately try to pry apart your key fob with pry tools. Change 1xCR2032 battery with flat head screwdriver.

Get new battery and install it in fob’s body. Battery must be placed with the same polarity as was an old. Your keyless entry remote will not work if you by mistake place battery wrong way.

When the new battery installed, verify remote key fob functionality by pressing buttons. If everything working properly, assemble your keyless entry fob's case in reverse order.

The last thing to do is put your cover back on fob. Gently try to assemble the pieces in place by hands from top to bottom. Check your fob shell for gaps. If it is not firmly closed try to repeat last step. Screw the back of the remote key fob.

Key Fob Battery Replacement 2010 Dodge Charger Video

Dodge Key Fob Battery replacement This Easy?

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Dodge Charger require 1xCR2032 batteries. Price for CR2032 batteries are under $5 depending on the brand, size packaging and type you buy. You can take old battery to the store, with you to find a proper replacement.

Often, after key battery change, reprogramming not required. Remote key fob reprogramming procedure often described in user's manual of your vehicle.

Yes, you can change battery in your 2010 Dodge Charger remote key fob yourself. Most difficult part is to open fob’s case. It's pretty easy with our step by step guide.

The price to change the battery in key can run anywhere $50-600 depending on the make and the service station.

Remote key fob batteries in Dodge Charger should be changed once in four years, but this will differ based on usage and quality. If your remote key fob reduced signal strength, you should change batteries before it stop open doors and make problems for you.

If your auto need multiple clicks to unlock or lock doors, key fob buttons not working, has low key battery indicator on dashboard or signal strength reduced, it's probably battery replace in key fob needed. Currently installed battery is weak with a high probability, but if it's not fix, remote key fob replace or repair needed.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: IYZ-C01C
  2. Models: 2008-2013 Dodge Charger