How to Replace the Battery in a 2010 Dodge Journey Key Fob
If your auto remote key fob is not working perfectly, the cell battery surely must to be changed. Yes, it is possible to change the battery in your remote key fob with our guide. Everything you need is outlined in this article.
What type battery does 2010 Dodge Journey remote key fob required
Replacing battery in remote key fob require 1xCR2032 battery, flat head screwdriver and phillips head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.- flat head screwdriver
- 1xCR2032 battery
- phillips head screwdriver
Step by step instruction
A button cell battery installed in the your remote key fob. Move the key out of the way if it is in the key fob. Unscrew the back of the remote key fob. Flip the remote key fob over and look for at least one screw holding in the plastic.
Carefully try to open your remote key fob with flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.
Get new battery and install it inside fob’s body. Be sure to connect the battery the right way around in a circuit. Your key will not work if you put battery wrong way.
Before assembling fob’s case, check that all is functioning by pressing buttons on circuit board.
The last thing to do is put your cover back on fob. Gently try to assemble the two halves in place by hands from top to bottom. If your fob case tightly closed, we done. If not, repeat the last step. Screw the back of the keyless entry remote.
How to change the battery video guide
DODGE JOURNEY KEY FOB BATTERY REPLACEMENT. KEY NOT WORKING, NOT LOCKING UNLOCKING FIX
Still not working? Buy new one