How to Replace the Battery in a 2010 Ford Edge Key Fob
If your Ford remote key fob is not working perfectly, the cell battery surely must to be changed. In this post, we outlined how to disassembly your car key fob and change your Ford key battery.
What size battery does 2010 Ford Edge keyless entry remote take
Before beginning disassembly keyless entry remote check all that you need: flat head screwdriver and 1 CR2032 battery.- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
A tiny button cell battery installed inside the your remote key fob. Accurately try to open your keyless entry remote with pry tools. Remove one CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside fob’s body. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, check keyless entry remote by pressing buttons. If all functions works, assemble your keyless entry fob's shell in reverse order.
The last thing to do is put your cover back on fob. Accurately try to assemble the pieces together by hands from top to bottom. If your key case firmly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
Ford Edge Remote Key Fob Battery Replacement 2007 - 2015
Still not working? Buy new one