How to Replace the Battery in a 2010 Ford Expedition Key Fob

If your Ford keyless entry remote is not unlock doors properly, the cell battery probably must to be changed. In this post, we are going to tell you how to disassembly Ford keyless entry remote and replace a discharged battery DIY. If you choose to do it at home near Expedition, follow our guide, but first make sure you have all you need before you start.
What is the battery key fob require
Before you start to open key fob make sure that you have all recommended tools and materials: one CR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
A small button cell battery installed in the your key fob. Delicately try to pry apart your keyless entry remote with hands or flat head screwdriver. Remove CR2032 battery with flat head screwdriver.
Now it's time to install new battery in keyless entry fob's case. Be sure to connect the battery the right way around in a circuit. Your remote key fob will not work if you put battery wrong way.
Before assembling fob’s case, make sure that all is functioning by pressing buttons on keyless entry remote.
At this point squeeze fob’s back cover together. Line your case two halves together and assemble it together by hands from top to bottom. If your fob body firmly closed, we done. If not, repeat the last step.
How to replace the battery video instruction
Ford Expedition Key FOB Battery Replacement 2009-2017