2010 Ford Fusion Key Fob Battery Replacement Guide

2010 Ford Fusion Key Fob Battery Replacement Guide

Keyless entry remote allow easy access to your auto. When the remote key fob battery is dead or weak you’ll not to be able lock car remotely. In this post, you’ll benefit from knowing how to open your car keyless entry remote and replace a dead battery DIY. If you gonna solve to do it at home near Fusion, follow our guide, but first make sure you have tools and materials required.

What type battery does 2010 Ford Fusion keyless entry remote take

Before going to open remote key fob check all that you need: flat head screwdriver and one CR2032 battery.
  • flat head screwdriver
  • 1xCR2032 battery

Step by step instruction

Inside of your remote key fob installed small button battery. Gently try to pry apart your keyless entry remote with flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.

Replace old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.

Before assembling keyless entry fob's case, check that all functions works by testing buttons on circuit board.

At this point squeeze fob’s back cover together. Line your shell two halves together and assemble it in place by hands from top to bottom. If your keyless entry remote shell tightly closed, we done. If not, repeat the last step.

How to replace the battery video instruction

2009 - 2014 Ford Keyfob Remote Battery Replacement

Still not working? Buy new one


Keyless entry remote of Ford Fusion use 1xCR2032 batteries. Most CR2032 batteries are under $4 build upon the brand, type and size packaging you buy. Take your old battery to the store, to be sure.

Usually, after key battery change, you do not need to reprogram. Keyless entry remote reprogramming procedure often described in user's manual of your vehicle.

Yes, you can change battery in your 2010 Ford Fusion keyless entry remote yourself. Most hard part is to disassembly keyless entry fob's case. It's pretty easy with our instruction.

Auto repair shop's price for change the battery in key fob is $50-600 depending on the make.

You should change batteries inside key fob of Ford Fusion at least once in three or four years. The term of battery differ on usage time, quality and operating conditions.

If your car signal strength reduced, key fob buttons not working, need multiple clicks to unlock or lock doors or has low key battery indicator on dashboard, it's probably battery replace inside remote key fob required. Currently installed battery is weak or dead with a high probability, but if it's not help, fob change or repair needed.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: OUCD6000022
  2. Models: 2006-2012 Ford Fusion