How to Open Your 2010 Honda Pilot Key Fob & Change Battery

How to Open Your 2010 Honda Pilot Key Fob & Change Battery

If your Honda keyless entry remote isn't open doors perfectly, the battery surely must to be changed. It's not complicated to change the battery in your keyless entry remote by yourself. All you need is explained in this article.

What size battery does 2010 Honda Pilot keyless entry remote take

Replacing batteries in keyless entry remote require flat head screwdriver, phillips head screwdriver and 2 CR2032 batteries. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
  • phillips head screwdriver
  • 2xCR2032 batteries
  • flat head screwdriver

Step by step instruction

Inside of your keyless entry remote installed coin cell battery. Remove screw on the back of the remote key fob. Spin the keyless entry remote over and look for at least 1 screw holding in the plastic.

Gently try to pry apart your fob with flat head screwdriver. Replace 2xCR2032 batteries with flat head screwdriver.

Change old batteries with fresh one CR2032. Battery must be installed with the same polarity as was a previous. Your keyless entry remote will not work if you by mistake put battery wrong way.

Before assembling fob’s case, verify that everything is functioning by pressing buttons on circuit board.

The last thing to do is put your cover back on fob. Accurately try to put the pieces in place by hands from top to bottom. If your key fob shell firmly closed, we done. If not, repeat the last step. Screw fastener in the back of the key fob.

Key Fob Battery Replacement 2010 Honda Pilot Video

How To Replace A Honda Pilot Key Fob Battery (2009-2013)

Still not working? Buy new one

Frequently Asked Questions

Key fob of Honda Pilot require 2xCR2032 batteries. Most CR2032 batteries are under $6 depending on the brand, size packaging and type you buy. You can take old battery to the store, with you to find a proper replacement.

Key fob in most of cases reprogramming not required after battery change. If your key not working, recheck new battery voltage. Otherwise, read user's manual or contact local dealer.

Replacing your key fob battery is simple to do in 2010 Honda Pilot. Most of car manufacturers think of the clients and make a special hole for key fob disassembly.

Car service price for replace the battery in fob is from $30 to as high as $500 depending on the brand.

You should change batteries inside key fob of Honda Pilot at least every three or four years. lifespan of battery vary on usage time, operating conditions and quality.

If your Honda key fob buttons not working, fob's battery more than 4 years old, signal strength reduced or need multiple clicks to unlock or lock doors, it's probably battery replace inside key fob required. Installed battery is discharged with a high probability, but if it's not fix problem, fob change or repair required.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: TIC-RS06AC
  2. Models: 2009-2014 Honda Pilot