How to Open Your 2010 Land Rover LR4 Key Fob and Change Battery
Keyless entry remote allow access to your car. Once the keyless entry remote battery is dead you’ll lose your keyless entry fob's ability to use distance opportunities. Yes, it is possible to change the battery in your key fob, and it’s easier than you think. Everything you need is outlined in this article.
What type battery keyless entry remote useBefore beginning open key fob check all that you need: flat head screwdriver and one CR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Step by step guide
A small coin battery installed inside the your remote key fob. Move the key out of the way if it is in the remote key fob.
Accurately try to disassemble your keyless entry remote with pry tools. Change CR2032 battery with flat head screwdriver.
Replace old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, make sure that everything is functioning by testing buttons on remote key fob.
At this point squeeze fob’s back cover together. Line your case two halves together and assemble it in place by hands from top to bottom. Check your remote key fob case for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2010 Land Rover LR4 Video
How to replace remote keyfob battery on Land Rover Discovery 4 LR4