2010 Land Rover Range Rover Key Fob Battery Replacement Guide
Key fob allow access to your car. Once the remote key fob battery is weak or dead you will not to be able unlock car remotely. Yes, it is possible to change the battery in your key fob DIY. All tools, that you need is explained below.
What kind of battery keyless entry remote require
Before beginning open remote key fob check all that you need: flat head screwdriver and 1 CR2032 battery.- flat head screwdriver
- 1xCR2032 battery
Step by step guide
Inside of your remote key fob installed tiny button cell battery. Remove any internal key first, and then try to pry apart the remote key fob.
Carefully try to disassemble your keyless entry remote with flat head screwdriver. Change 1 CR2032 battery with flat head screwdriver.
Get new battery and install it inside fob’s body. Be sure to connect the battery the right way around in a circuit. Your keyless entry remote will not work if you connect battery wrong way.
Before assembling fob’s case, verify that all functions works by pressing buttons on remote key fob.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it in place by hands from top to bottom. Inspect your keyless entry remote case for gaps. If it is not tightly closed try to repeat last step.
How to replace the battery video instruction
How to replace keyfob battery on Range Rover Sport 2010
Still not working? Buy new one