How to Open Your 2010 Land Rover Range Rover Sport Key Fob and Change Battery
If your auto remote key fob isn't working properly, the battery most likely needs to be replaced. In this post, you’ll benefit from knowing how to open Land Rover key fob and change a discharged battery yourself. If you decide to do it at home near Range Rover Sport, use this guide, but first make sure you have all you need.
What is the battery remote key fob require
Before going to disassembly keyless entry remote check all that you need: 1xCR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
A tiny coin battery installed in the your remote key fob. Remove any internal key first, and then try to pry apart the key fob.
Delicately try to disassemble your key with pry tools. Remove one CR2032 battery with flat head screwdriver.
Get new battery and install it in fob’s body. Battery must be placed with the same polarity as was a previous. Your key will not work if you mistakenly place battery wrong way.
Before assembling keyless entry fob's case, verify that everything is functioning by testing buttons on remote key fob.
The last thing to do is put your cover back on fob. Carefully try to assemble the pieces in place by hands from top to bottom. If your fob shell tightly closed, we done. If not, repeat the last step.
How to change the battery video guide
How to replace keyfob battery on Range Rover Sport 2010
Still not working? Buy new one