2010 Lincoln MKS Key Fob Battery Replacement Guide

Keyless entry remote grant easy access to your auto. If the remote key fob battery is discharged you will lose your fob’s ability to use distance opening function. Below, you’ll benefit from knowing how to open Lincoln key fob and change a dead battery DIY. If you gonna solve to do it at home near MKS, use this guide, but first make sure you have tools and materials required before you start.
What size battery does 2010 Lincoln MKS key fob take
Changing battery in remote key fob require flat head screwdriver and 1 CR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
Inside of your remote key fob installed coin cell battery. Carefully try to pry apart your key with pry tools. Change one CR2032 battery with flat head screwdriver.
Get new battery and install it in fob’s shell. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, make sure that all working good by pressing buttons on key fob.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it in place by hands from top to bottom. Inspect your key shell for gaps. If it is not firmly closed try to repeat last step.
Video of key fob opening
Lincoln MKT Key Fob Battery Replacement - DIY