2010 Mercury Milan Key Fob Battery Replacement Instructions
If your car key is not open doors perfectly, the battery likely must to be replaced. Below, we explained how to disassembly your car keyless entry remote and replace your Mercury key battery.
What type battery does 2010 Mercury Milan key fob required
Before going to disassembly keyless entry remote make sure that you have all required tools and materials: flat head screwdriver and one CR2032 battery.- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
Inside of your remote key fob installed coin cell battery. Delicately try to disassemble your remote key fob with hands or flat head screwdriver. Change 1 CR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's shell. Be sure to connect the battery the right way around in a circuit. Your keyless entry remote will not work if you put battery wrong way.
After the new battery installed, check keyless entry remote functionality by pressing buttons. If all functions works, assemble your fob’s shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body pieces together and put it in place by hands from top to bottom. If your fob shell firmly closed, we done. If not, repeat the last step.
Video of remote key fob disassembly
2009 - 2014 Ford Keyfob Remote Battery Replacement
Still not working? Buy new one