2010 Mitsubishi Endeavor Key Fob Battery Replacement Instructions

2010 Mitsubishi Endeavor Key Fob Battery Replacement Instructions

Remote key fob allow easy access to your car. When the key fob battery is dead you lose your fob’s ability to control remote functions. In this article, we outlined how to open your key fob and change your Mitsubishi key battery.

What size battery does 2010 Mitsubishi Endeavor keyless entry remote required

Changing batteries in key fob require flat head screwdriver and CR2032 batteries. Prepare these materials and tools before opening and make sure to match the type of your keyless entry fob's batteries.
  • flat head screwdriver
  • 2xCR2032 batteries

Step by step instruction

Inside of your key fob installed small coin cell battery. Remove any internal key before you try to pry apart the key fob.

Accurately try to open your remote key fob with pry tools. Remove two CR2032 batteries with flat head screwdriver.

Get new batteries and install it inside fob’s body. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.

When the new batteries installed, check remote key fob by pressing buttons. If all functions works, assemble your fob’s case in reverse order.

The last thing to do is put your cover back on fob. Delicately try to assemble the pieces in place by hands from top to bottom. Inspect your key shell for gaps. If it is not tightly closed try to repeat last step.

How to replace the battery video guide

How To Replace Mitsubishi Endeavor Key Fob Battery 2006 2007 2008 2010

Still not working? Buy new one

Frequently Asked Questions

Keyless entry remote of Mitsubishi Endeavor require 2xCR2032 batteries. Price for CR2032 batteries are under $4 build upon the size packaging, type and brand you buy. You can take old battery to the store, to find a proper replacement.

Often, after key fob battery change, you do not need to reprogram. Don't be scare of this procedure, because often it's described in user's manual.

Replacing your keyless entry remote battery is simple to do in 2010 Mitsubishi Endeavor. Most of car manufacturers think about customers and make a special hole for key fob disassembly.

The price to change the battery inside keyless entry remote is $50-600 depending on the brand and the service pricing.

You should change batteries inside keyless entry remote of modern cars at least once in four years. The lifetime of battery differ on usage time, quality and operating conditions. Famous brands cells usually will last longer.

These symptoms will warning you that it's possible time to replace battery in your Mitsubishi Endeavor: multiple clicks to unlock or lock doors required, key fob buttons not working, you didn't change battery more than 4 years and low key battery indicator on dashboard.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: WKE-PZ113-04021
  2. Models: 2010-2012 Mitsubishi Endeavor