2010 Nissan 370Z Key Fob Battery Replacement Guide
If your car key fob is not working well, the battery probably must to be changed. It's not complicated to replace the battery in your key fob, and it’s easier than you think. All tools, that you need is described in this article.
What type battery does 2010 Nissan 370Z key fob requiredBefore starting disassembly keyless entry remote make sure that you have all required tools and materials: 1xCR2032 battery and flat head screwdriver.
- flat head screwdriver
- 1xCR2032 battery
Step by step instruction
A coin battery installed in the your remote key fob. Remove any internal key first, and then try to pry apart the key fob.
Accurately try to disassemble your key with flat head screwdriver. Remove one CR2032 battery with flat head screwdriver.
Replace old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
When the new battery installed, verify keyless entry remote functionality by pressing buttons. If everything working good, assemble your fob’s case in reverse order.
The last thing to do is put your cover back on fob. Carefully try to put the two halves in place by hands from top to bottom. If your remote key fob body firmly closed, we done. If not, repeat the last step.
How to change the battery video guide
2009 - 2019 Nissan 370Z Key Fob Battery Replacement - EASY DIY
Still not working? Buy new one