2010 Nissan Armada Key Fob Battery Replacement Guide
If your auto remote key fob isn't open doors properly, the battery likely must to be replaced. Yes, it is possible to change the battery in your remote key fob with our guide. All you need is described below.
What type battery does 2010 Nissan Armada remote key fob requiredReplacing battery in key fob require flat head screwdriver and one CR2025 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
- 1xCR2025 battery
- flat head screwdriver
Simple steps to replace the battery in your car's keyless entry remote
A small coin battery installed in the your keyless entry remote. Move the key out of the way if it is in the key fob.
Delicately try to pry apart your key fob with pry tools. Replace CR2025 battery with flat head screwdriver.
Change old battery with new one CR2025. Battery must be installed with the same position as was an old. Your keyless entry remote will not work if you by mistake place battery wrong way.
When the new battery installed, check key fob by pressing buttons. If all functions works, assemble your keyless entry fob's body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and assemble it together by hands from top to bottom. Check your fob case for gaps. If it is not tightly closed try to repeat last step.
Key Fob Battery Replacement 2010 Nissan Armada Video
NISSAN ARMADA KEY FOB BATTERY REPLACEMENT. KEY NOT WORKING
Still not working? Buy new one