How to Replace the Battery in a 2010 Toyota Yaris Key Fob
If your Yaris keyless entry remote is not unlock doors properly, the battery probably needs to be changed. It's not difficult to replace the battery in your keyless entry remote DIY. Everything you need is outlined in this article.
What is the battery remote key fob require
Prior to disassembly remote key fob check all that you need: flat head screwdriver and 1 CR2016 battery.- flat head screwdriver
- 1xCR2016 battery
Step by step instruction
A small button battery installed inside the your keyless entry remote. Remove any internal key before you try to pry apart the keyless entry remote.
Delicately try to open your key fob with pry tools. Change CR2016 battery with flat head screwdriver.
Replace old battery with fresh one CR2016. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
After the new battery installed, verify key fob functionality by pressing buttons. If everything working fine, assemble your keyless entry fob's case in reverse order.
At this point squeeze fob’s back cover together. Line your shell pieces together and put it together by hands from top to bottom. If your keyless entry remote body firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2010 Toyota Yaris Video
How To Replace A 2007 - 2013 Toyota Yaris Key Fob Battery FCC ID MOZB41TG
Still not working? Buy new one