How to Replace the Battery in a 2010 Volvo V70 Key Fob
If your car remote key fob isn't working properly, the cell battery surely needs to be changed. It's not complicated to replace the battery in your key fob, and it’s easier than you think. Everything you need is explained in this article.
What type battery key fob requireReplacing batteries in key fob require two CR2430 batteries and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the type of your fob’s batteries.
- 2xCR2430 batteries
- flat head screwdriver
Step by step guide
Inside of your keyless entry remote installed tiny coin battery. Remove any internal key before you try to pry apart the keyless entry remote.
Accurately try to disassemble your remote key fob with pry tools. Remove CR2430 batteries with flat head screwdriver.
Replace old batteries with new one CR2430. Be sure to connect the battery the right way around in a circuit. Your key will not work if you place battery wrong way.
Before assembling keyless entry fob's case, verify that all working fine by pressing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your body two halves together and assemble it in place by hands from top to bottom. If your key body tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2010 Volvo V70 Video
How To Change A Car Remote Key Battery on Volvo v70 xc70 s60 s80 cx70 cx90
Still not working? Buy new one