How to Replace the Battery in a 2010 Volvo XC60 Key Fob
If your auto remote key fob is no longer unlock doors well, the cell battery most likely must to be changed. In this article, we walks you through how to open your key fob and change your Volvo key battery step by step.
What type battery does 2010 Volvo XC60 keyless entry remote takeBefore going to open keyless entry remote check all that you need: CR2430 batteries and flat head screwdriver.
- flat head screwdriver
- 2xCR2430 batteries
Step by step guide
A tiny button cell battery installed inside the your keyless entry remote. Remove any internal key before you try to pry apart the key fob.
Gently try to pry apart your remote key fob with flat head screwdriver. Change 2 CR2430 batteries with flat head screwdriver.
Replace old batteries with fresh one CR2430. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling fob’s case, verify that all functions works by testing buttons on key fob.
At this point squeeze keyless entry fob's back cover together. Line your case two halves together and assemble it together by hands from top to bottom. Check your keyless entry remote case for gaps. If it is not firmly closed try to repeat last step.
How to replace the battery video guide
How To Change A Car Remote Key Battery on Volvo v70 xc70 s60 s80 cx70 cx90