2011 Chevrolet Suburban Key Fob Battery Replacement Instructions
Remote key fob allow easy access to your car. If the remote key fob battery is weak or dead you lose your fob’s ability to use distance opportunities. It's not difficult to replace the battery in your key fob, and it’s easier than you think. All tools, that you need is outlined in this post.
What size battery does 2011 Chevrolet Suburban keyless entry remote take
Before going to disassembly key fob make sure that you have all recommended tools and materials: flat head screwdriver and 1 CR2032 battery.- 1xCR2032 battery
- flat head screwdriver
Simple steps to replace the battery in your car's remote key fob
Inside of your keyless entry remote installed tiny coin battery. Accurately try to open your keyless entry remote with hands or flat head screwdriver. Remove 1xCR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling fob’s case, make sure that all is functioning by testing buttons on remote key fob.
The last thing to do is put your cover back on fob. Carefully try to assemble the pieces in place by hands from top to bottom. If your remote key fob case firmly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2011 Chevrolet Suburban Video
Tahoe / Suburban Key Fob Battery Replacement - DIY
Still not working? Buy new one