2011 Chevrolet Tahoe Key Fob Battery Replacement Guide

Keyless entry remote grant easy access to your Chevrolet. When the keyless entry remote battery is weak or dead you will not to be able lock doors remotely. Below, you will benefit from knowing how to open Chevrolet remote key fob and change a weak or dead battery DIY. If you decide to do it at home near Tahoe, use this guide, but don't forget to check all you need before you start.
What type battery keyless entry remote use
Before going to open remote key fob check all that you need: CR2032 battery and flat head screwdriver.- 1xCR2032 battery
- flat head screwdriver
Step by step guide
Inside of your keyless entry remote installed tiny button battery. Gently try to pry apart your remote key fob with pry tools. Remove 1 CR2032 battery with flat head screwdriver.
Get new battery and install it in keyless entry fob's shell. Battery must be installed with the same polarity as was an old. Your key will not work if you by mistake place battery wrong way.
After the new battery installed, check key fob by pressing buttons. If all functions works, assemble your fob’s body in reverse order.
At this point squeeze fob’s back cover together. Line your shell pieces together and put it in place by hands from top to bottom. Check your keyless entry remote body for gaps. If it is not tightly closed try to repeat last step.
Video of key fob opening
How To Replace Chevrolet Tahoe Key Fob Battery 2007 2008 2009 2010 2011 2012 2013 2014
Still not working? Buy new one