Replace Key Fob Batteries

How to Open Your 2011 Jeep Liberty Key Fob and Change Battery

How to Open Your 2011 Jeep Liberty Key Fob and Change Battery

Key fob allow easy access to your auto. Once the keyless entry remote battery is dead you not to be able unlock trunk or doors from distance. It's not complicated to change the battery in your key fob, and it’s easier than you think. All you need is described in this article.

What type battery does 2011 Jeep Liberty keyless entry remote required

Don't forget before disassembly key fob make sure that you have all required tools and materials: flat head screwdriver and 1xCR2032 battery.
  • 1xCR2032 battery
  • flat head screwdriver

Simple steps to change the battery in your car's keyless entry remote

A small coin battery installed in the your keyless entry remote. Remove any internal key first, and then try to pry apart the keyless entry remote.

Delicately try to open your keyless entry remote with hands or flat head screwdriver. Change CR2032 battery with flat head screwdriver.

Get new battery and install it inside fob’s body. Battery must be installed with the same position as was a previous. Your remote key fob will not work if you mistakenly place battery wrong way.

Before assembling fob’s case, verify that everything is functioning by pressing buttons on circuit board.

At this point squeeze keyless entry fob's back cover together. Line your case two halves together and put it in place by hands from top to bottom. Check your key fob shell for gaps. If it is not firmly closed try to repeat last step.

Key Fob Battery Replacement 2011 Jeep Liberty Video

Jeep key fob battery replacememt

Still not working? Buy new one

Frequently Asked Questions

Remote key fob of Jeep Liberty require 1xCR2032 batteries. Price for CR2032 batteries are under $4-6 depending on the size packaging, brand and type you buy. You can take old battery to the store, to find a proper replacement.

Keyless entry remote in most of cases do not need to be reprogrammed after battery replace. If your key not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Changing your remote key fob battery is simple to do in 2011 Jeep Liberty. Most of car manufacturers think of the clients and make a special hole for keyless entry remote disassembly.

Auto repair shop's cost for change the battery in remote key fob is from $30 to as high as $500 depending on the make.

You should replace batteries inside key fob of Jeep Liberty at least once in three or four years. The lifetime of battery differ on frequency of use, operating conditions and quality.

If your car key fob buttons not working, need multiple clicks to unlock or lock doors, has low key battery indicator on dashboard or signal strength reduced, in most cases battery change in keyless entry remote needed. Current battery is discharged with a high probability, but if it's not help, key fob replace or repair needed.
Be the first to comment.
Your message is required.

Contents:

  1. Battery Size and Tools
  2. Replacement Guide
  3. Video Instruction
  4. FAQ

Other Jeep Models:

Fob Compatibility:

  1. FCC ID: OHT692713AA
  2. Models: 2011-2012 Jeep Liberty