2011 Kia Borrego Key Fob Battery Replacement Instructions
If your auto keyless entry remote is not working well, the cell battery likely needs to be changed. In this case, you’ll benefit from knowing how to open Kia keyless entry remote and change a dead battery DIY. If you decide to do it at home near Borrego, use this instruction, but don't forget to check everything you need before you start.
What kind of battery keyless entry remote usePrior to disassembly key fob make sure that you have all recommended tools and materials: flat head screwdriver and 1xCR2032 battery.
- flat head screwdriver
- 1xCR2032 battery
Step by step guide
Inside of your keyless entry remote installed tiny coin cell battery. Move the key out of the way if it is in the remote key fob.
Accurately try to open your key fob with flat head screwdriver. Replace 1 CR2032 battery with flat head screwdriver.
Now it's time to install new battery inside keyless entry fob's shell. Every battery has a negative and positive side and if you put the wrong connector down, the current cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
Before assembling keyless entry fob's case, make sure that everything is functioning by testing buttons on key fob.
The last thing to do is put your cover back on fob. Accurately try to put the two halves together by hands from top to bottom. Inspect your key fob body for gaps. If it is not tightly closed try to repeat last step.
How to change the battery video guide
How To Replace Kia Borrego Key Fob Battery 2009 2010 2011