How to Open Your 2011 Toyota Highlander Key Fob & Change Battery
Keyless entry remote allow easy access to your car. When the remote key fob battery is weak you’ll not to be able unlock trunk or doors remotely. It's not complicated to replace the battery in your keyless entry remote, and it’s easier than you think. All tools, that you need is outlined below.
What type battery does 2011 Toyota Highlander key fob requiredReplacing battery in key fob require CR2032 battery and flat head screwdriver. Prepare these materials and tools before opening and make sure to match the size of your keyless entry fob's batteries.
- 1xCR2032 battery
- flat head screwdriver
Simple steps to change the battery in your Highlander's remote key fob
A tiny coin battery installed in the your remote key fob. Move the key out of the way if it is in the key fob.
Carefully try to disassemble your fob with hands or flat head screwdriver. Remove 1 CR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Battery must be placed with the same position as was an old. Your remote key fob will not work if you by mistake place battery wrong way.
After the new battery installed, verify keyless entry remote functionality by pressing buttons. If everything working properly, assemble your fob’s shell in reverse order.
The last thing to do is put your cover back on fob. Accurately try to assemble the two halves in place by hands from top to bottom. If your key fob case firmly closed, we done. If not, repeat the last step.
How to change the battery video guide
2008 - 2013 Toyota Highlander Key Fob Battery Replacement - DIY