2012 Ford Escape Key Fob Battery Replacement Instructions
If your auto remote key fob is no longer unlock doors well, the cell battery most likely must to be replaced. In this article, we described how to open your key fob and change your Ford key battery.
What is the battery key fob requireReplacing battery in keyless entry remote require flat head screwdriver and 1xCR2032 battery. Prepare these materials and tools before opening and make sure to match the size of your fob’s batteries.
- 1xCR2032 battery
- flat head screwdriver
Step by step guide
A small button battery installed inside the your remote key fob. Move the key out of the way if it is in the keyless entry remote.
Accurately try to open your keyless entry remote with pry tools. Remove 1xCR2032 battery with flat head screwdriver.
Change old battery with new one CR2032. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check polarity on battery, by "+" mark.
When the new battery installed, verify key fob functionality by pressing buttons. If all functions works, assemble your keyless entry fob's shell in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it together by hands from top to bottom. If your remote key fob case tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2012 Ford Escape Video
Ford Key Fob Battery Replacement - Focus, Escape, Explorer, Expedition, Edge
Still not working? Buy new one