2012 Honda CR-Z Key Fob Battery Replacement Instructions
Remote key fob grant easy access to your CR-Z. Once the keyless entry remote battery is weak or dead you’ll not to be able close doors remotely. It's not complicated to replace the battery in your keyless entry remote by yourself. Everything you need is outlined in this post.
What type battery does 2012 Honda CR-Z key fob takeBefore you start to disassembly key fob check all that you need: flat head screwdriver, phillips head screwdriver and one CR1616 battery.
- flat head screwdriver
- 1xCR1616 battery
- phillips head screwdriver
Step by step instruction
A tiny coin battery installed inside the your remote key fob. Remove screw on the back of the key fob. Spin the remote key fob over and find for at least one fastener holding in the plastic.
Delicately try to pry apart your keyless entry remote with flat head screwdriver. Remove 1 CR1616 battery with flat head screwdriver.
Replace old battery with new one CR1616. Every battery has a negative and positive side and if you put the wrong connector down, the charge cannot go into your circuit board and make it work. Check position on battery, by "+" mark.
Before assembling keyless entry fob's case, verify that all functions works by pressing buttons on circuit board.
At this point squeeze fob’s back cover together. Line your case two halves together and put it together by hands from top to bottom. Inspect your fob body for gaps. If it is not firmly closed try to repeat last step. Screw fastener in the back of the keyless entry remote.
How to replace the battery video guide
2005 - 2013 Honda CR-Z Key Battery Replacement Guide
Still not working? Buy new one