2012 Mitsubishi Galant Key Fob Battery Replacement Instructions
Keyless entry remote allow access to your Mitsubishi. If the key battery is dead you’ll lose your fob’s ability to use remote functions. Below, we explained how to disassembly your car remote key fob and change your Mitsubishi key battery.
What size battery does 2012 Mitsubishi Galant key fob take
Prior to disassembly remote key fob check all that you need: flat head screwdriver and 2xCR2032 batteries.- 2xCR2032 batteries
- flat head screwdriver
Simple steps to change the battery in your car's key fob
Inside of your remote key fob installed tiny coin cell battery. Remove any internal key before you try to pry apart the keyless entry remote.
Carefully try to pry apart your key with flat head screwdriver. Remove two CR2032 batteries with flat head screwdriver.
Get new batteries and install it inside fob’s body. Be sure to connect the battery the right way around in a circuit. Your key will not work if you connect battery wrong way.
After the new batteries installed, check remote key fob by pressing buttons. If everything working good, assemble your fob’s body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your case pieces together and put it together by hands from top to bottom. If your keyless entry remote case tightly closed, we done. If not, repeat the last step.
Key Fob Battery Replacement 2012 Mitsubishi Galant Video
DIY - Key Battery Mitsubishi Battery Change / Lance / Eclipse / Galant
Still not working? Buy new one