2012 Mitsubishi Outlander Sport Key Fob Battery Replacement Instructions

2012 Mitsubishi Outlander Sport Key Fob Battery Replacement Instructions

Remote key fob allow access to your Outlander Sport. Once the key fob battery is weak you will lose your fob’s ability to use remote functions. In this article, we outlined how to open your remote key fob and replace your Mitsubishi key battery.

What type battery does 2012 Mitsubishi Outlander Sport keyless entry remote required

Before beginning disassembly key fob be sure that you have all recommended tools and materials: flat head screwdriver and 1 CR2032 battery.
  • 1xCR2032 battery
  • flat head screwdriver

Step by step instruction

A small coin battery installed inside the your remote key fob. Move the key out of the way if it is in the key fob.

Gently try to open your key fob with hands or flat head screwdriver. Replace 1 CR2032 battery with flat head screwdriver.

Get new battery and install it inside fob’s case. Be sure to connect the battery the right way around in a circuit. Your key will not work if you place battery wrong way.

Before assembling fob’s case, make sure that all working fine by testing buttons on circuit board.

At this point squeeze keyless entry fob's back cover together. Line your shell pieces together and put it in place by hands from top to bottom. Inspect your fob shell for gaps. If it is not tightly closed try to repeat last step.

How to replace the battery video instruction

DIY - Key Battery Mitsubishi Battery Change / Lance / Eclipse / Galant

Still not working? Buy new one

Frequently Asked Questions

Key fob of Mitsubishi Outlander Sport use 1xCR2032 batteries. Most CR2032 batteries are under $5 depending on the size packaging, brand and type you buy. Take your old battery to the store, with you to find a proper replacement.

Remote key fob in most of cases do not need to be reprogrammed after battery change. If your key not working, recheck new battery voltage. If it is not help, read user's manual or contact local dealer.

Yes, you can replace battery in your 2012 Mitsubishi Outlander Sport keyless entry remote yourself. Most difficult part is to open fob’s case. It's pretty simple with our guide.

The cost to replace the battery inside keyless entry remote is in range from $30 to as high as $500 depending on the car and the service station.

Keyless entry remote batteries in Mitsubishi Outlander Sport should be replaced once in 3-4 years, also this will vary based on their amount of use and battery quality. If your keyless entry remote reduced signal strength, you should replace batteries before it stop close doors and make trouble for you.

These symptoms will alert you that it's probably time to replace battery in your 2012 Mitsubishi Outlander Sport: you didn't change battery more than 4 years, signal strength reduced, multiple clicks to unlock or lock doors required and low key battery indicator on dashboard.
Be the first to comment.
Your message is required.

Fob Compatibility:

  1. FCC ID: WKE-PZ113-04021
  2. Models: 2011-2014 Mitsubishi Outlander Sport