2012 Nissan Murano Key Fob Battery Replacement Instructions
Remote key fob grant access to your Nissan. Once the remote key fob battery is discharged you’ll not to be able unlock car from distance. Below, you will benefit from knowing how to open Nissan keyless entry remote and replace a weak or dead battery yourself. If you choose to do it at home near Murano, follow our instruction, but don't forget to check all you need before you start.
What type battery does 2012 Nissan Murano keyless entry remote required
Before you start to disassembly key fob check all that you need: CR2032 battery and flat head screwdriver.- flat head screwdriver
- 1xCR2032 battery
Step by step guide
A small coin battery installed inside the your key fob. Move the key out of the way if it is in the remote key fob.
Delicately try to disassemble your keyless entry remote with flat head screwdriver. Change 1xCR2032 battery with flat head screwdriver.
Change old battery with fresh one CR2032. Battery must be installed with the same position as was a previous. Your keyless entry remote will not work if you by mistake place battery wrong way.
After the new battery installed, check key fob functionality by pressing buttons. If all functions works, assemble your keyless entry fob's body in reverse order.
At this point squeeze keyless entry fob's back cover together. Line your body two halves together and put it together by hands from top to bottom. If your remote key fob case firmly closed, we done. If not, repeat the last step.
How to change the battery video guide
Nissan Key Fob Battery Change - How To DIY Learning Tutorials
Still not working? Buy new one